Product added to cart
Skunkwurx 'Duo MAX' Carbon Fibre Ariel Atom Front Wing
1 In Stock
Eke out every last bit of front downforce from your Ariel Atom with the Skunkwurx 'Duo MAX' carbon front wing!
Worldwide Express Shipping
Hassle Free Returns
Skunkwurx 'Duo MAX' Carbon Fibre Ariel Atom Front Wing. The Duo MAX wing has been designed to give the maximum amount of downforce for track use. Due to the design of the wing and the limitations imposed by the design of the car, it can only be fitted at the lowest fixing points. The wing has been designed primarily for track use where ground clearance is not an issue but can also be used on the street, however care should be taken over kerbs and speed ramps.
When front wings are fitted to a car for track use, we highly recommend driving at a managed speed and completely on the asphalt and gradually building up your speed, The front wing can change the handling of the car and care must be taken to ensure endplates are not hitting or bouncing off high kerbs, and to get used to the width of the wing, which is not very visible from the driver seat.
The carbon version of the wing comes in a 3K twill weave with a high gloss finish, ready to mount on your car.
Please note your car needs to have the front towing eye bracket fitted for this to attach to. You can check if your car has this by seeing if the mounting for a towing eye is present directly below the nose cone.
|Material||Carbon Fiber Composite|
Write Your Own Review
Please see the INSTALLATION INSTRUCTIONS in our blog for our guides.
Hello, Could you please advise if the Atom front spoiler is available ? Already have one of your dual element wings on the rear of my Atom so it would be great to have a match.
Our website shows live stock values so if it is showing it is available then it will be in stock ready to ship (or collect). If it is showing as a pre-order item them you can contact us to know the ETA of our next shipment. Occasionally we have ex-demo...
Hi ----c/f wise does this match the factory rear spoiler ?? + how easy is it fit the mounting bracket on a AA 3.5 ?
Hi, yes it matches the weave of the factory spoilers. The front bracket installation is fairly straightford, the only thing slightly complicated is the radiator has to be detached from its pipes to allow the fittings to be installed and the coolant ...